Automatic water injection:
(Prepare enough pure water or medical distilled water) Insert one end of the tube into the automatic water injection (drainage) port, the other end into the water, then turn on the power, turn it on, press the green automatic pumping button on the left side of the back, the instrument screen is not Display, when the water is full, it will stop automatically and the screen will display.
Automatic drainage:
Insert one end of the pipe into the automatic drain (water injection) port, the other end into the water, then turn on the power, turn it on, press the green automatic pumping button on the right side of the back, the instrument's screen is not displayed, and the water stops automatically after the water is drained. . If water is flowing from the automatic drain (water injection) port, keep pressing the green button on the left.
Remarks: Because the instrument is equipped with a super-cooling system, after the first water is added, it is necessary to start the machine for five minutes and then add water to the instrument in the stop state until the overflow hole has water. When the instrument is used frequently, it is recommended. Change the water once every 15 days,
If the gun is hot in 10 seconds before the new machine is turned on for the first time (the air in the gun head does not circulate in the gun head), please shut down immediately.
Raise the gun head over the top of the head and shake it three times. After the water in the gun is left in the water tank, turn it on again. If the gun head is still hot, you can repeat the previous action. Remember not to turn on the water!
